paul buckner

Measured my drive hight and this is what I have From the centre of the torpedo straight line back I am 5 and a half inches below hull ,this is on a twin Engine 28 ft Pantera , I have been told on here that this is a standard drive hight for a pleasure craft , my question is what would be considered a performance inches below hull ,Bravo one drives . Looking for a bit more speed .

Unlimited jd

iTrader: (5)

2-4" below. Notched transom? Ext box?

Dave M

I'd call Jo at Pantera and ask him. I'm sure they have plenty of R&D info on that hull.

smiklos@sunprint

iTrader: (1)

Ideal without box box is probably about 3.5 below

paul buckner

Thanks

Craney

iTrader: (2)

My drives are 6''3/4 below the transom but I have Trs with 2'' spacers in them.

dereknkathy

a pair of 2 inch shorties make more sense than r&r drivetrains and redoing transom cut-outs to raise everything up. plus if u hate the result you can resell the shorties and have it back to stock.

paul buckner

Thanks . That is what I was thinking , a case of suck it and see .