Gimble ring repair
#1
Registered
Thread Starter
Gimble ring repair
Called JR Marine today and got a message that they will be closed until mid March.
Anyone else out there do gimble ring repairs?
Need swivel pin hole and shoe surface repaired.
Anyone else out there do gimble ring repairs?
Need swivel pin hole and shoe surface repaired.
#3
Registered
Thread Starter
I'd prefer sending it to someone that has lots of experience doing this particular repair.
#4
Registered
iTrader: (1)
I just got a pair of them back a couple weeks ago. Both the upper swivel shaft and the wear plate were fixed. This is something the local machine shop could not do. The wear pads have to be perfect. Build the area up too much and the outdrive will not go back on, too little defeats the purpose. It only took a couple days for both of mine to be fixed. Ron even painted them... I would wait.
#5
Registered
Thread Starter
That's what I'd be afraid of. Only someone experienced with this repair would know the proper tolerances.
Surprised to hear he painted them too. His website states owner would be responsible for paint. Gotta ask abt that.
Surprised to hear he painted them too. His website states owner would be responsible for paint. Gotta ask abt that.
#7
That's true. But JR more than likely has the fixtures, and possibly always setup and ready to make chips. Whereas a machine shop would start off at square one.
__________________
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.
Some people are like Slinkies - Not really good for anything, but they
bring a smile to your face when pushed down the stairs.