Best flame arrestor
#5
Registered
iTrader: (1)
Edit in: Before someone states what they don't know, I do these easy tests the right way: ie same day and hour, same sdection of water, and handful of runs both ways. Also, again, a small light boat that responds to everything - including battery placement.
Last edited by SB; 03-16-2014 at 04:45 PM.
#6
W
What did you have on before the K&N arrestor?
I beg to differ, Last boat I did FA performance data on lost almost 2mph with a K&N 9x3 assembly. Granted small light boat, but still a 350cid engine.
Edit in: Before someone states what they don't know, I do these easy tests the right way: ie same day and hour, same sdection of water, and handful of runs both ways. Also, again, a small light boat that responds to everything - including battery placement.
Edit in: Before someone states what they don't know, I do these easy tests the right way: ie same day and hour, same sdection of water, and handful of runs both ways. Also, again, a small light boat that responds to everything - including battery placement.
#9
Registered
iTrader: (1)
I've done fine with the bigger K&N's...on dyno too. But this boat could only fit that 9X3. FYI: Most boats I've seen with the KN FA have the 9x3's. Too bad.