SOLID HUBS......on Mercury props
#1
Registered
Thread Starter
Join Date: Oct 2000
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
SOLID HUBS......on Mercury props
With solid hubs there are 4 pieces of plastic or teflon. This idea is lame......I did see a solid hub with rubber (round) strips epoxied in place. Can anyone tell where to obtain a few.
I have tried, but they all come with the teflon strips
I have tried, but they all come with the teflon strips
#2
Platinum Member
Join Date: Oct 2001
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
solid hubs
hey guy; precision propeller in INDY has just come out with a new and better design of solid hubs. here is there number 1-800-922-9955 , talk to mark croxton hope this helps bill
#4
Guest
Posts: n/a
I have a couple of used ones in stock that are 3 5/8" long with the round strips. Merc makes a short and a long one depending on the prop suffix. They are for 400+ HP applications and run around $51 each new. The ones with the flat strips are for the HD propshaft on racing outboards and Bravo XR & XZ sterndrives.
#5
OSO Moderator
Charter Member
I needed these as well. These parts are not listed anywhere! My merc dealer had to call merc racing and ask. They do sell them seperate and have a part # for them.
Have your merc dealer call and inquire.
BTW, they are expensive for what they are.
Have your merc dealer call and inquire.
BTW, they are expensive for what they are.
__________________
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
BillR
'00 Scarab Sport 302 CC
'02 Cigarette Top Gun TS
'02 PQ 340
'00 PQ 280
'98 Scarab 22
'97 Baja Outlaw 20
'72 Checkmate
'65 Glastron
#7
Registered
Thread Starter
Join Date: Oct 2000
Posts: 1,238
Likes: 0
Received 0 Likes
on
0 Posts
Wild Willy.....called Mark.....they do not have anything to do with solid hubs..other than welding them into Turbo brand props.
Thanks.........we tried.
ThunderChick is ont he mark......I can get them.........but each time they come......they have the teflon stips and not the rubber. I don't know which one would be more reliable
ThunderChick: the one I have now....measure 4 3/8" long for the XR shaft. I swap them out between the cleavers and the Bravo props. It's a real pain changing them and holding the 4 strips in place.........let alone in the water at times
Thanks.........we tried.
ThunderChick is ont he mark......I can get them.........but each time they come......they have the teflon stips and not the rubber. I don't know which one would be more reliable
ThunderChick: the one I have now....measure 4 3/8" long for the XR shaft. I swap them out between the cleavers and the Bravo props. It's a real pain changing them and holding the 4 strips in place.........let alone in the water at times
Last edited by enticer; 08-20-2002 at 10:15 PM.