Oil Temp Question

Reply Subscribe

Thread Tools

05-25-2014 | 10:47 PM

#21

242LS

Registered

Joined: Jun 2009

Posts: 952

Likes: 83

From: East Greenwich, RI

Quote:

Originally Posted by MILD THUNDER

Before you go nutty, get it up to temp and shoot the filter with a infrared gun. Make sure you're gauge/sender are telling a true story.

EXACTLY what I was going to say. This happened to me. After $1090.00 later (two new coolers), the builder found the sending units were a mismatch in ohms to the Gaffrig gauge. BIG waste of money. Heat gun is the answer. Home Depot for $40.

05-26-2014 | 08:16 AM

#22

Captain YARRR

Registered

Joined: Dec 2010

Posts: 1,671

Likes: 29

Quote:

Originally Posted by Wes Burmark

If your engine is computer controlled it may not like the switch from a 160º to a 140º thermostat...just something to consider.

Captain Yarrr, with your pumped up 6.2s I would recommend oil temp gauges. You might be surprised at how hot your oil is getting.

Yes I think I'm adding that to my list. I put the IR thermometer in my boat this weekend so I can get a rough idea. I have coolers but I would feel better if I check on it.

05-26-2014 | 11:52 AM

#23

Young Performance

Registered

Joined: Jan 2004

Posts: 4,480

Likes: 43

From: Tennessee

Quote:

Originally Posted by Captain YARRR

Yes I think I'm adding that to my list. I put the IR thermometer in my boat this weekend so I can get a rough idea. I have coolers but I would feel better if I check on it.

An oil temp gauge is one of the most important gauges on the dash. It is also, the one that is most overlooked when installing gauges. Most people would be extremely surprised (unpleasantly) at what their oil temp climbs to.
Eddie