Screw in fuel sending unit
06-30-2014, 02:57 PM
#1
Registered
Thread Starter
iTrader: (3)
Join Date: Aug 2011
Location: Charlotte, NC
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
Screw in fuel sending unit
I have a 2000 38 Fountain Lightning and the port fuel gauge does not work. It looks to be a screw in. Part number 7826 240/33 . Can not seem to find this number for replacement.
07-01-2014, 02:47 PM
#2
Registered
It might be easier to figure out what the resistance range of the sensor is and just find one that matches. Most resistance sensors are 0 to 150 ohms. You could get a cheap rheostat from radio shack and sweep it from 0 to 150 ohms and check your gauge function. I know my Gaffrig fuel pressure is 0 to 150. You could just get their sensor.
