Stainless vs brass sea pump
07-28-2014 | 04:51 PM
#11
Registered
Joined: Aug 2010
Posts: 1,384
Likes: 565
I'm aware the OP has a different style but I still haven't seen those that cheap.
Last edited by cheech; 07-28-2014 at 05:00 PM.
07-28-2014 | 11:26 PM
#13
Registered
Joined: Jan 2003
Posts: 356
Likes: 2
From: Clinton, Iowa / LOTO 20MM
This is the one I ordered,
Harden Marine 625-4110, Replaces a sierra #18-3600 and Mercruiser 46-72774A32 and 46-807151A12. Also replaces two-piece raw water pump. Fits most Bravo, TR, TRS applications.
The Gen 7 is 320.00 - 330.00??
Harden Marine 625-4110, Replaces a sierra #18-3600 and Mercruiser 46-72774A32 and 46-807151A12. Also replaces two-piece raw water pump. Fits most Bravo, TR, TRS applications.
The Gen 7 is 320.00 - 330.00??
07-29-2014 | 11:30 AM
#14
Registered
Joined: Aug 2010
Posts: 1,384
Likes: 565
That number is $370. Gen 7 $420. Let me know where I can save a $100?
08-04-2014 | 06:04 PM
#19
Registered
Joined: Jun 2014
Posts: 267
Likes: 12
From: Buffalo, NY
I use the mercruiser plastic version. I just replaced my front part of the pump where the bearings and seals are. wheep hole was leaking but it was original 20 years ago. The plastic pumps are cheap. I buy the whole kit with new seals and bolts for 50.00 sometimes less. If you took the price of that stainless pump 400.00 and divided it by 50.00 every 2 seasons that's 16 boating seasons. I'll stay with the plastic M.O.
Ryan
