carb help
#11
Platinum Member
Platinum Member
STRAPMAN!
I just was looking back thru the thread. You said Stage2 Procharged?
In a blowthru box, you gotta change the floats from stock, run different powervalves, and different carb jetting than any off the rack caarb.
Floats must be the black nitrophyl (the stock floats will crush under pressure and sink).
Powervalves must be resized or removed. Jetting will need to go up around three sizes over NA size.
You might want to send a spec sheet and the carb to Nickerson.
I just was looking back thru the thread. You said Stage2 Procharged?
In a blowthru box, you gotta change the floats from stock, run different powervalves, and different carb jetting than any off the rack caarb.
Floats must be the black nitrophyl (the stock floats will crush under pressure and sink).
Powervalves must be resized or removed. Jetting will need to go up around three sizes over NA size.
You might want to send a spec sheet and the carb to Nickerson.