efi vr carb
 

We took our baja with a new 540 to be tunned
The shop is telling us to dump the efi and put on a carb. they feel one side of the moter is running rough and tell us a carb will take care of it. The shop sayes they can go ahead with the efi but it will cost alot more. I feel like im taking a step backward Does any one have any imput.

carb is ok but I would stick with the EFI

get another shop to fix your boat,whats next point ignition?

Sounds like you went to the wrong place.

I went from carbs to efi and I would never go back.

what EFI system ? if you are trying to get a factory merc unit to work with a 540 going to get $$$$$$$$ aftermarket EFI will be much better, but cost wise the carb is going to be much cheaper..

The systems from FAST aren't terribly expensive. Seems like about 4k would do a 540.


...unless I overlooked something?

depends on what you can spend...can get a nice carb/intake for a grand or so....so 4k for EFI...3k can by a lot of fuel

Less, about $2600
http://www.offshoreonly.com/forums/g...mable-efi.html

The fuel system that the owner or owner's repair shop can tune correctly is the right choice.

If you can't tune what you have, either learn or switch.

Obviously, you can switch shop's too.

Find someone that can actually tune what you have, or run your current efi setup, intake, throttle body, injectors, rails, sensors, ect, with either the Fast or Holley self tune ECM and harness.