Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Need engine advice N A 598 cubic inch rebuild (https://www.offshoreonly.com/forums/general-q/318685-need-engine-advice-n-598-cubic-inch-rebuild.html)

14 apache 01-02-2015 09:51 PM

Picture of that head gasket?

the mayor 01-02-2015 09:54 PM


Originally Posted by Black Baja (Post 4243384)
If you get a chance post a pic of the piston that was next to bad cylinder.

Not sure they labeled them. There in a box I have not really looked at them. The builder even returned the bearings.

14 apache 01-02-2015 10:14 PM

Think this engine has more than one blow up by looking at other pistons. Glad your back up and running though.

the mayor 01-03-2015 07:02 AM


Originally Posted by 14 apache (Post 4243410)
Think this engine has more than one blow up by looking at other pistons. Glad your back up and running though.

Not sure how you came to that conclusion. I have ran the boat for three seasons which is mid May to early October here depending on weather. With out any problems. I would do a leak down test and compression test at the end of every season always had similar numbers as when I bought it.
It's new now hope it last at least 3 seasons or more.

ROB FREEMAN 01-04-2015 10:26 AM

me three my friend .. its a boat they just break .. often . best of luck

the mayor 05-25-2015 05:09 PM

Finally took it out for test run today. Runs great didn't really push it. I think a high torque starter may be required now.

the mayor 05-25-2015 05:31 PM

Video link initial start on a hose.

http://i927.photobucket.com/albums/a...D_00000127.mp4
.

GPM 05-25-2015 06:07 PM

Very Nice !!!

ROB FREEMAN 05-25-2015 07:10 PM

sounded great .. very crisp . best of luck

ROB FREEMAN 09-29-2016 09:26 PM

hows she running my fiend


All times are GMT -5. The time now is 08:01 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.