|
Originally Posted by justinp20012500
(Post 4261259)
I am having Eddie do my fuel system which requires the elimination of the cool fuel and pump.
Is there an oil cooler that can go in place of the cool fuel? I will pick up the thermostatic adapter to run with one if I can get it to fit. Seems like a good location. |
What cooler did you end up with?
|
Originally Posted by tbanzer
(Post 4261494)
What cooler did you end up with?
|
Originally Posted by hadleycat
(Post 4261540)
If you were asking me I purchased a 3" X 16" from CP Performance
|
Originally Posted by hadleycat
(Post 4261461)
I plan on putting my new cooler in that same location. I purchased 2 of these http://www.cpperformance.com/p-13327...r-bracket.aspx to hold the cooler to the existing cool fuel bracket. I am sure it will involve some cutting and grinding on the existing bracket. I recieved my new cooler and it is monstrous compared to the tiny fuel cooler.
When you get it done will you snap a few pics? I am still a month away from tearing down. |
Duplicate...
|
Originally Posted by justinp20012500
(Post 4261935)
So you will utilize the water line that once ran through the cool fuel?
When you get it done will you snap a few pics? I am still a month away from tearing down. |
3 Attachment(s)
[ATTACH=CONFIG]537444[/ATTACH][ATTACH=CONFIG]537445[/ATTACH][ATTACH=CONFIG]537446[/ATTACH]
Mounted the cooler today. Fuel Cooler bracket works great for this. Even the factory holes lined up for bolting on the Stainless mounts. Only fabrication left to do is weld a couple of the unused factory holes shut just because I am being picky. |
3 Attachment(s)
[ATTACH=CONFIG]537447[/ATTACH][ATTACH=CONFIG]537448[/ATTACH][ATTACH=CONFIG]537449[/ATTACH]
|
Looks excellent, that is exactly what I was thinking!
|
| All times are GMT -5. The time now is 03:10 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.