Offshoreonly.com
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   ignition coils (https://www.offshoreonly.com/forums/general-q/322305-ignition-coils.html)

sutphen 30 01-22-2015 07:41 PM
Originally Posted by Black Baja (Post 4254274)
Oil filled is ok just make sure it sits upright.
That and don't over tighten the holding clamp.

sutphen 30 01-22-2015 07:44 PM
Originally Posted by endeavour32 (Post 4254235)
There is no need for anything MSD on your boat. Not only will it not be as reliable as your Thunderbolt system, you are not going to see any performance gains either. If it were me, I would stick to a good stock coil and be done with it.
this or any of the chevy 350/454 coils from 1988-1998.Gergen fairly cheap from napa or one of those stores

I'CE 01-25-2015 03:10 AM
Originally Posted by weldcrane (Post 4253991)
The Gucci boat that was for sale here
Congrats and good luck with her. Looked like a nice old school Apache with out the over the moon pricing.

Never tried one but ck. Pertronix Epoxy Filled - part# PER-40111, 40611 or 45111 (diff ohm ratings)

weldcrane 01-25-2015 05:46 AM
Thank you will look them up


All times are GMT -5. The time now is 07:05 PM.
Page 2 of 2
1
2
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.