Intake Manifold Gaskets
 

I have Weiand 6130 intake - Gen 6 502 with stock heads.

Which is the right gasket for my application?

Searching on here I found the Fel-Pro 1275S-3 which looks close, but I realized that it has a cutout in both the front and rear for the water passage and I don't believe I want that. http://www.jegs.com/i/Fel-Pro/375/1275S-3/10002/-1

What is the difference between that and the normal 1275? http://www.summitracing.com/parts/FEL-1275/

Is there a proper gasket that seals off the rear water passage?

Thanks,

Eric

I think you mean you want the water blocked in the rear.

Yes - fixed............

Thank you...

EDIT - Looks like this is the one I want....

http://www.marineengineparts.com/eng...ines-only.html

Not sure why it is marked as "EFI Only"?!?!?!

does your manifold have 6 or 8 holes per side for bolts

6......

#17341 has open exhaust crossovers.
http://fme-cat.com/LiveImages/Medium...41_P04_TOP.jpg

#17342 has closed off exhaust crossovers (+ rear water ports) and it appears that has slight cutouts for the factory steel lifter valley tray.
http://fme-cat.com/LiveImages/Medium...42_P04_TOP.jpg

It appears to have 8 per side.

https://rspimages.holley.com/6130win.jpg

Those 2 on the outside are not used on my current intake so it really is 6.

I think the 342 is the one I need.....

Why Do you block off the back water passages?