Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   496ci 585hp tuneup (https://www.offshoreonly.com/forums/general-q/325237-496ci-585hp-tuneup.html)

TC9ball 04-17-2015 12:49 PM

496ci 585hp tuneup
 
My friend jyst got this really nice engine in 26ft celebrity Andretti... and it needs a tuneup. I'm thinking idle should be around 1000 ish and timing about 10btdc. ????

Thanks for your input.

Todd

indysupra 04-17-2015 12:57 PM

Depending on the drive you will never get it out of gear if it idles at 1k

mike tkach 04-17-2015 01:04 PM

can you give more info on the engine,like what ignition system,type of outdrive etc?

TC9ball 04-17-2015 01:06 PM

Bravo 1. Standard coil

wannabe 04-17-2015 01:30 PM

That must be a one hell of a cam in that thing. 585 HP out of 496 cu in. Is this a Carb or Fuel inj motor.

Wannabe

SB 04-17-2015 01:36 PM

If Tbolt IV Set total timing to 32-34. You choose - it's your motor. Initial will be what it is after setting total.

Idle 800rpm if possible.

TC9ball 04-17-2015 02:40 PM

Total timing is 3000rpm..?

TC9ball 04-17-2015 02:41 PM

It has a holly.. wish I could post a picture...ugggg

SB 04-17-2015 02:44 PM


Originally Posted by TC9ball (Post 4293413)
Total timing is 3000rpm..?

Many different modules out there...so.....

Total timing is where it stops advancing......

Example: was tuning a set of 525sc's. Was told those modules stopped at 3200rpm. Well, they didn't. They stopped at 4200 rpm. Imagine if I set total different than I do rpm wise ? Again, I go to where it stops advancing and then I bring it to a good 300-400rpm more to make sure it isn't advancing. This is no place to assume nor get fooled.

SB 04-17-2015 02:56 PM


Originally Posted by TC9ball (Post 4293417)
It has a holly.. wish I could post a picture...ugggg

What does she have to do with it ?


All times are GMT -5. The time now is 06:18 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.