Offshoreonly.com - rocker arm stud diflection

Page 8 of 11

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - rocker arm stud diflection (https://www.offshoreonly.com/forums/general-q/325276-rocker-arm-stud-diflection.html)

mike tkach

04-19-2015 09:00 PM

if i had a magic wand i would wave it your way and turn you into pixie dust.:blahblah::blahblah:

mike tkach

04-19-2015 09:05 PM

Quote:

Originally Posted by buck35 (Post 4294110)

Mtk
I like you , if you're right, be humble, if not .. well its not a competition. Many of of us don't know the people offering advice.
Bb , you obviously know a lot as well, and post a bunch of excellent information, but everything including this post is no more than than the posters experience or opinion, but thats why we are all here, to get facts and opinions. :)

i like facts,i dont like bad information with nothing to back it up,sometimes i just get tired of it so from time to time i call out the bs.

Black Baja

04-19-2015 09:17 PM

Quote:

Originally Posted by mike tkach (Post 4294121)

so now your story IS that the bosses on pro1 heads are a problem,man you sure change your story a lot,do you even realize how you flip flop.if you would like i can quote you,r posts just as a reminder of the trash you spew.

Yeah you have completely lost me. As I have said from the beginning it's the rocker bosses. Look at a Pro 1 head and compare it to a Brodix, AFR or whatever the Pro1 has a lot less material in this area. I have not flip flopped this has been my point from the beginning. Remember the OP's issue? That's why I posted what I did. Guess you missed the entire point. Whatever.

Black Baja

04-19-2015 09:19 PM

Quote:

Originally Posted by mike tkach (Post 4294126)

ok bb,i think we have you figured out.make sure you come back with something you think is witty,lol.

You are a pure investigative genius. Like that one?

mike tkach

04-19-2015 09:26 PM

FACT,i have installed a minimum of 15 sets of pro1 heads with no stud boss issues.FACT the shop that does my machine work has installed hundreds of sets of pro1 heads without any stud boss issues.this track record leads me into believing that the pro1 head is with no stud boss flaws.i will leave it at that and people reading this thread can make up their own mind on if the pro1 head has issues with the stud bosses.

mike tkach

04-19-2015 09:27 PM

Quote:

Originally Posted by black baja (Post 4294141)

you are a pure investigative genius. Like that one?

thank you.

mike tkach

04-19-2015 09:37 PM

Quote:

Originally Posted by dereknkathy (Post 4293918)

is there a valve cover that clears stud girdles and clears marine exhausts?

yes,teague,cp performance,ekkert and many others sell them and a stud girdle will fit under them.

ICDEDPPL

04-20-2015 12:08 AM

Mike, I don`t think you got the memo.
On OSO if it`s not AFR it`s junk.

dereknkathy

04-20-2015 06:02 AM

Quote:

Originally Posted by ICDEDPPL (Post 4294190)

Mike, I don`t think you got the memo.
On OSO if it`s not AFR it`s junk.

but AFR's have exhaust port issues...

Budman II

04-20-2015 08:43 AM

Quote:

Originally Posted by dereknkathy (Post 4294215)

but AFR's have exhaust port issues...

:poopoo: Here comes another 20 pages! :hitfan: ;)

All times are GMT -5. The time now is 10:44 PM.

Page 8 of 11

« First

Last »

Show 40 post(s) from this thread on one page