Valve Cover Breathers: What Works?
10-11-2015 | 10:32 AM
#21
Thread Starter
Registered
Joined: Oct 2010
Posts: 922
Likes: 128
From: Hemlock, MI
Little update: I installed the Hardin Extreme Billet 4.5" tall double baffled breathers with one in the rear of each valve cover. Zero oil mist coming from them, zero vapor coming from them. Completely cured my issues. I will never run those K&N style again. Like Eddie Young said, mine got soaked with oil and caused even more issues.
10-11-2015 | 10:39 AM
#22
Registered
Joined: Jan 2009
Posts: 721
Likes: 3
From: Algonac MI
Little update: I installed the Hardin Extreme Billet 4.5" tall double baffled breathers with one in the rear of each valve cover. Zero oil mist coming from them, zero vapor coming from them. Completely cured my issues. I will never run those K&N style again. Like Eddie Young said, mine got soaked with oil and caused even more issues.
I am running the same ones on my blower motor with no issues.
10-12-2015 | 11:07 PM
#24
Registered
Joined: Oct 2008
Posts: 1,316
Likes: 77
Little update: I installed the Hardin Extreme Billet 4.5" tall double baffled breathers with one in the rear of each valve cover. Zero oil mist coming from them, zero vapor coming from them. Completely cured my issues. I will never run those K&N style again. Like Eddie Young said, mine got soaked with oil and caused even more issues.
10-15-2015 | 02:34 PM
#25
Thread Starter
Registered
Joined: Oct 2010
Posts: 922
Likes: 128
From: Hemlock, MI
Here you go. I put one on the rear of each valve cover.
This is what I bought:
http://www.cpperformance.com/p-13509...-breather.aspx
This is what I bought:
http://www.cpperformance.com/p-13509...-breather.aspx
