Cole2534

iTrader: (1)

Putting a new shifter/throttle assembly in the boat and I can either buy adapters or new 33c cables. I want the new cables, but what else do I need to make the change?

Factory merc shift bracket and 502 throttle body. Current cables are marked 12', I'm guessing that's the length I need to use with the 33c's?

Cole2534

iTrader: (1)

Upon further research- is this all?

http://www.keperf.com/p-13363-mercur...e-adapter.aspx

Payton

yep

MILD THUNDER

iTrader: (3)

Hey cole, depending on the shifter brand, you might need special ends for the cable end up there.

Like my setup, I have the zero effort Kiekaefer throttles. They use a little metal hook style end up at the shifter. But on the engine side, I have the red plastic cable ends like you posted.

What kind of shifter you installing? You may already have the 33cc cable in the boat?

I do recommend the "extreme" cables or whatever they are called. few bucks more, but are smoother operating and better made than the standard red jacket cable.

Cole2534

iTrader: (1)

Sup Joe?

I'm installing the Dana marine side mount. It specifically calls for 33c's, came with cable ends already tapped 10-32. Solid unit for sure, all machined aluminum.

I'll take a look at the extremes, thanks!

http://teaguecustommarine.com/em0011...ight-hand.html