Speedo hook up?
 

Hi, I have just gotten a 95 Fountain 32ft with bravos. Where do the speedo tubes hook up to the drive? There are both tubes coming thru transom but neither one is hooked to anything. I realize that they will not be accurate but would like for the speedo to at least work. Thanks

Raise the drives fully up and feel for the plastic fitting between the two Rams inside the center front of drive. More of a feel thing than see thing. Gotta twist the lever to the side and lift out.

Are just the black rubber hoses visible or do they have the yellow fittings on the end of them? The yellow plastic barbed fittings I reference is part number 16 in this pic:

https://www.mercruiserparts.com/Show...sp?dnbr=809808 96&ivar=images/COMMON/18720.png&inbr=1943&bnbr=180&bdesc=BELL+HOUSING

As US1 says, raise the drives all the way up and look at the top of the forward section of the lower unit. You will see a hole with two slots where those fittings push into and then turn to lock in place.

Yes all that is there is the black hoses. I will raise them up and see if I can figure it out. Thanks
I could not get the link to work. Knot 4 Me