Offshoreonly.com
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Just Confirming - Cometic Head Gasket Reusable?? (https://www.offshoreonly.com/forums/general-q/327931-just-confirming-cometic-head-gasket-reusable.html)

Griff 07-02-2015 11:20 PM
Originally Posted by Black Baja (Post 4324958)
What if you can't remember the order?
There is a specific order for torqueing down head bolts.

Black Baja 07-03-2015 05:54 AM
Originally Posted by Griff (Post 4325473)
There is a specific order for torqueing down head bolts.
Yes, I understand. Actually manufacturers have a removal pattern also.

mmb 09-17-2015 10:54 PM
No sealant on the head gasket and put it in salt water you are going to have some serious erosion in a few hours if it is an aluminum head... I'm still trying to decide whats better copper spray coat or light coat of black rtv around the water ports...

anyone have any input on that?

Bawana 09-18-2015 12:54 AM
Originally Posted by mmb (Post 4355998)
No sealant on the head gasket and put it in salt water you are going to have some serious erosion in a few hours if it is an aluminum head... I'm still trying to decide whats better copper spray coat or light coat of black rtv around the water ports...

anyone have any input on that?
Either way is good... If I don't want to spray copper coat on gasket I will At LEAST put a very thin layer of right stuff around water ports


All times are GMT -5. The time now is 07:30 PM.
Page 3 of 3
1
2
3
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.