Port manifolds&risers not getting enough water.
07-29-2015, 06:00 PM
#11
Registered
Thread Starter
Join Date: Dec 2014
Location: NYC
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
Condensation from sitting couple years. They had brand new oil once I started them it turned to milk. I have the quicksilver filters just figured I'd run this oil for a little while.
Cmi not leaking I pressure tested them. Runs fine with them just didn't want to cook those 4"hoses on top so I'm having v-bands welded on.
Cmi not leaking I pressure tested them. Runs fine with them just didn't want to cook those 4"hoses on top so I'm having v-bands welded on.
