Offshoreonly.com - Carrier bearing flange

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Carrier bearing flange (https://www.offshoreonly.com/forums/general-q/329453-carrier-bearing-flange.html)

JimV	08-09-2015 08:06 AM

Carrier bearing flange

1 Attachment(s)

Hey Guy's Im looking for a PTO flange for a stellings stand off box. Merc uses them for triple engine application center motor drive shaft. Anyone know where I can get one? [ATTACH=CONFIG]544006[/ATTACH] Im looking for the center hub

MILD THUNDER

08-09-2015 08:22 AM

Maybe this will help ya Jim. Also, might be worth a post in the wanted section, maybe someone has one laying around

http://www.mercruiserparts.com/Show_...TS+%28BRAVO%29

JimV	08-09-2015 10:09 AM

Holy crap that's expensive. Thanks

airjunky

08-09-2015 10:44 AM

I believe i have one . Attaches to about a 5'or6' driveshaft. May need the id measurement of the inner centering flange of the u joint hub from your driveshaft .

Griff

08-09-2015 12:27 PM

I was surfing last night and Shogren has a couple used ones in their parts section.

JimV	08-09-2015 03:09 PM

Thanks

mrquad1

08-09-2015 03:17 PM

just a little info the merc carriers use concave washers and the stellings carriers use a flat surface,also you will need the correct shim washers to align for input shaft on gimble shaft from drive

JimV	08-09-2015 03:33 PM

Quote:

Originally Posted by airjunky (Post 4340282)

I believe i have one . Attaches to about a 5'or6' driveshaft. May need the id measurement of the inner centering flange of the u joint hub from your driveshaft .

PM sent

JimV	08-09-2015 03:40 PM

Quote:

Originally Posted by mrquad1 (Post 4340353)

just a little info the merc carriers use concave washers and the stellings carriers use a flat surface,also you will need the correct shim washers to align for input shaft on gimble shaft from drive

Mine would be the merc carrier then. It has the concave washers I bought the box used with an adjustable jack bolt and the box is slotted. It is a stellings box unless merc got theres from stelling Thanks Jim

All times are GMT -5. The time now is 05:39 PM.