Offshoreonly.com - Adding oxgen sensor to Gil riser

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Adding oxgen sensor to Gil riser (https://www.offshoreonly.com/forums/general-q/329719-adding-oxgen-sensor-gil-riser.html)

Mr Maine

08-17-2015 01:44 PM

Quote:

Originally Posted by CIG3 (Post 4343775)

You could go this way also. Jeff can build them for Gil as well.

http://wagsengineering.com/wp-conten...or-300x210.jpg

http://wagsengineering.com/products/...sensor-spacer/

Cool option, thanks. Wonder if the thickness of it would cause any issue with alignment of the transom tips? Probably suck it up with the rubber exhaust hose, although its a pretty short piece as the gil risers are quite long.

hullofjustis

08-19-2015 10:37 AM

I have had one in for 2 months so far so good

All times are GMT -5. The time now is 09:43 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page