Offshoreonly.com
Page 11 of 17
« First
9
10
11
12
13
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Cam Suggestions for a 540 (https://www.offshoreonly.com/forums/general-q/331444-cam-suggestions-540-a.html)

Full Force 10-13-2015 12:51 PM
MAybe Dan will bust out the flag speedo for Black Baja to show his spirit!!

Originally Posted by MILD THUNDER (Post 4365688)
Mrs icdedppl makes great lattes after a day of wrenching on boats . We should opt for decaf at this event however

Black Baja 10-13-2015 12:54 PM
Originally Posted by Full Force (Post 4365693)
MAybe Dan will bust out the flag speedo for Black Baja to show his spirit!!
Oh hell no.

ICDEDPPL 10-13-2015 12:54 PM
Would it be OK with you guys if I invite all my avatar girls?? They all have their teeth I promise

SB 10-13-2015 12:59 PM
Originally Posted by ICDEDPPL (Post 4365695)
Would it be OK with you guys if I invite all my avatar girls?? They all have their teeth I promise
Can you leave 'no teeth' as an option ?

Black Baja 10-13-2015 01:01 PM
Sure Dan, just no man speedo. This is the U.S. Not Europe for Gods sake.

offshorexcursion 10-13-2015 01:34 PM
Originally Posted by SB (Post 4365698)
Can you leave 'no teeth' as an option ?
I see where your going! A gummer!

hammerdown500 10-13-2015 07:35 PM
go with your proposed build you will be happy with it for what u r looking for. I have built a 540 and 548, with the same basic setup and now I have a 509 doing the same. all making basically same hp(575-620). actually have been running a 489 with the 741 cam in it 10.5:1 comp and running well for 2 seasons. making 550hp.

mike tkach 10-13-2015 11:25 PM
Originally Posted by SB (Post 4365684)
You may not believe this, but I would be into that...one problem, I don't drink....but I'm sure coffee is easy enough.
well i guess im in.i don,t drink coffee but i love beer.sb,take my coffee cause i,m drinking your share of the
beer!

Jeff H 10-14-2015 12:00 AM
You might consider talking to ATECO , ask for bill. 847-623-2737. Built a pair of 540 short decks, out of HP500s , ran great , with good manners. And great torque. Very reliable . Spend the extra money on the dyno time. It is worth it. Drop them in and they run.

Jeff h

22MTR 10-16-2015 05:24 PM
Originally Posted by hammerdown500 (Post 4365852)
go with your proposed build you will be happy with it for what u r looking for. I have built a 540 and 548, with the same basic setup and now I have a 509 doing the same. all making basically same hp(575-620). actually have been running a 489 with the 741 cam in it 10.5:1 comp and running well for 2 seasons. making 550hp.
Are you running the 335 heads ?? I am lookin for specific feed back on if they are perhaps a bit large. Also what are you running for an intake?


All times are GMT -5. The time now is 02:45 AM.
Page 11 of 17
« First
9
10
11
12
13
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.