Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   PSE superchargers (https://www.offshoreonly.com/forums/general-q/331556-pse-superchargers.html)

Bawana 10-12-2015 03:13 PM

PSE superchargers
 
Has anyone herd of or ever used PSE Superchargers?

MILD THUNDER 10-12-2015 05:52 PM

You mean "PSI" ? OR this guy?

http://www.nsxprime.com/forum/showth...-Superchargers!!

Bawana 10-12-2015 06:10 PM

Yes Joe, its the second guy.Just wondering if anyone used him on marine super chargers. Mainly the 850, 1075, 1200 stuff. Before I post In the beware section, I just wanted to see if anyone had good luck with them. Or bad luck for that matter.

articfriends 10-12-2015 06:51 PM

I read that whole convoluted thread , sounds like this pse guy aside from having possible quailty control issues is a fng idiot in general, WTF??

Bawana 10-12-2015 07:38 PM

Well, long story short he was sent 4 super chargers off a twin Merc 850SCI boat. Only one supercharger was bad (timing slipped & screws lightly touched), so what the heck send them all in to get checked. The guy charges rush fees, and total to fix is more then new ones WTF??? Ok whatever right? well they don't last 10 minutes, and thats only Idle and up to 3500 RPM max. Now all 4 are junk. He gets called and he says to send them back he will take care of it. Ya right... he then admits to putting car screws in them instead of the marine spec'd screws. He charges to fix them again with the original rotors & holds them ransom until payment is taken care of. He points fingers at Merc racing and everyone else involved but his own company. This even after admitting to putting the wrong parts in them.

ICDEDPPL 10-12-2015 10:57 PM

These were your blowers that he screwed up?

Bawana 10-12-2015 11:10 PM

No not mine thank god. A very close friends.

Bawana 10-12-2015 11:13 PM

Dan I am roots blower guy... not that sissy screw blower stuff... LOL:hitfan::hitfan:

mike tkach 10-13-2015 12:19 AM


Originally Posted by Bawana (Post 4365533)
Dan I am roots blower guy... not that sissy screw blower stuff... LOL:hitfan::hitfan:

that will change when u decide u want to make more power!

Bawana 10-13-2015 12:45 AM


Originally Posted by mike tkach (Post 4365539)
yhat will change when u decide u want to make more power!

You have a point Mike & when that time comes I will go to twin turbo's... LOL


All times are GMT -5. The time now is 03:15 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.