Offshoreonly.com - Ignition dead on 525sc

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Ignition dead on 525sc (https://www.offshoreonly.com/forums/general-q/332371-ignition-dead-525sc.html)

Baja8808

11-11-2015 04:14 PM

Ignition dead on 525sc

The port engine lost an ignition module. Need some advice on a replacement module. Has anyone tried the Daytona Sensor module for this motor? Or should I try to find a stock module.

Griff

11-11-2015 06:38 PM

The pick up module in the distributor ??? or the ignition advance module???

Baja8808

11-11-2015 06:47 PM

The advance module.

MILD THUNDER

11-11-2015 07:30 PM

Quote:

Originally Posted by Baja8808 (Post 4375057)

The port engine lost an ignition module. Need some advice on a replacement module. Has anyone tried the Daytona Sensor module for this motor? Or should I try to find a stock module.

You talking about the daytona sensor programmable marine ignition? Yes, I have. You can do some cool things with it. It also has a stock 525SC advance curve built into it as well.

Griff

11-11-2015 10:22 PM

I don't know anything about the Daytona module set up.

There are a few 525SC TB IV Modules( 814295A1)on ebay for $200-300

I assume you swapped modules between engines to verify it was bad???

Baja8808

11-12-2015 09:08 AM

Thanks Mild.. Griff, yes I swapped them and it was the module..

All times are GMT -5. The time now is 10:49 AM.