Offshoreonly.com
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Cam question (https://www.offshoreonly.com/forums/general-q/332584-cam-question.html)

murfman 07-17-2016 12:13 AM
Originally Posted by hallj (Post 4460420)
You should be just fine.
I run a 221/230 @ 112 In my Mag.
No worries.

Jeff
I didn't think it would be a problem but just wanted to check, thanks

murfman 12-05-2016 02:23 PM
Revisiting this, just second guessing myself. To get at .045 Quench with my pistons and heads my compression works out to 9.345 static and 8.079 dynamic. This should be good for 89 Octane with iron heads correct?

getrdunn 12-05-2016 03:37 PM
Originally Posted by murfman (Post 4507010)
Revisiting this, just second guessing myself. To get at .045 Quench with my pistons and heads my compression works out to 9.345 static and 8.079 dynamic. This should be good for 89 Octane with iron heads correct?
You should be fine. back timing down until your comfortable.


All times are GMT -5. The time now is 01:36 PM.
Page 5 of 5
« First
3
4
5
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.