Offshoreonly.com - Power Steering Fittings/Hose Question

Page 2 of 2

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Power Steering Fittings/Hose Question (https://www.offshoreonly.com/forums/general-q/334794-power-steering-fittings-hose-question.html)

corey331

02-23-2016 01:56 PM

Quote:

Originally Posted by ezstriper (Post 4407422)

just get a set for what you had, the pump fitting should be the same, saginaw pump, the return is just a 3/8 slip on, make sure you use a P/S cooler

I'm not using the stock LS pump and with the location of my PS pump, the hoses will be longer than stock. As far as a cooler goes I have a 24" x 3" diameter oil cooler w/thermostat and a PS cooler. So I should be good as long as I get the right fittings. Which I should be able to do.

ezstriper

02-24-2016 06:34 AM

what pump are you running ? still location should be close enough for a factory line to reach, the return you can buy bulk p/s hose for that(don't use fuel line) to make whatever run you need, you can contact AGR they build the pumps for a lot of custom deals and probably have the fittings

corey331

02-24-2016 08:01 AM

Cool, I 'll check out AGR. Thanks!!

All times are GMT -5. The time now is 05:06 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page