Prop slip
#4
Registered
iTrader: (7)
Ah. I'm maybe on the high side? I've got a 24' Python but haven't run it yet otherwise I'd give you some numbers as a reference. Not the most efficient hull but is a good one. Sounds like you might have your hands full depending on what you plan to turn the 26p which in my opinion is a riot. Lol.
Last edited by getrdunn; 02-25-2016 at 08:02 PM.
#6
Registered
iTrader: (7)
Rather than a nos button attached to your throttle it might not be a bad idea to have one of those things old people press for emergencies. **** bud that thing is gonna scoot. Be careful...was just kicking some comparisons around from my 24' challenger days.
#8
Registered
iTrader: (7)
10 is a really good number. My 89 challenger was very close to 11%. Boat would run 81 with 496/535hp in it. That boat had a pretty slippery bottom for its time.
What kind of power you running?
What kind of power you running?
#10
Registered
iTrader: (7)
Did you change the x dim? Sounds like you have it right on. Why the 1.65 ratio drive with that? Also What kind of max rpm's did you plan on running. Something doesn't make since at all. I just didn't think you'd be turning much over 6,000.???
Last edited by getrdunn; 02-25-2016 at 09:18 PM.