Need 525SC clone advise

Reply Subscribe

Thread Tools

04-19-2016 | 07:24 PM

#11

79formula

Registered

Joined: Oct 2012

Posts: 896

Likes: 38

From: Buffalo NY

What would you want for the blower? Nevermind. I just saw its a B&M not the weiand.

Last edited by 79formula; 04-19-2016 at 07:35 PM.

04-19-2016 | 07:36 PM

#12

79formula

Registered

Joined: Oct 2012

Posts: 896

Likes: 38

From: Buffalo NY

I had the water passages welded shut so water only travels through the jumper hose.

Quote:

Originally Posted by Vmax

Leak check of manifold shows 6 does not have manifold leak. The super Seal Mr Gasket was only allowing hairline contact since scalloped back from motor head flange at 6 . Rust was there like hairline exhaust leak. I think probable reversion cause with my low idle.

Anybody have a favored gasket with EMIs or get direct from EMI? I don't want a repeat with 540.

04-20-2016 | 01:12 PM

#13

dereknkathy

Registered

Joined: Feb 2012

Posts: 4,031

Likes: 10

From: westville, NJ

Pull and do autopsy on the 420. If you are sure it was reversion you must be SURE that problem is fixed. Even if replacing the exhaust is only answer.