ISO rubber feet for Fountain bench seat
#1
Registered
Thread Starter
Join Date: Dec 2010
Location: Port Deposit Md
Posts: 523
Likes: 0
Received 0 Likes
on
0 Posts
ISO rubber feet for Fountain bench seat
All but two of the rubber feet that are attached to the under side of the bench seat on my 2000 Fountain are either missing or broken and I have not been able to locate any. I need to get at least 10. Because with out them the screws are tearing the gel coat up. They are one inch in diameter and 3/8" thick with a stepped hole in the center for the screw. Any leads would be appreciated.
#4
Registered
iTrader: (2)
I found mine locally also, maybe Home Depot? I'll check my bin to see if I have the MFG info.
**edit: I think these are the right feet
http://www.homedepot.com/p/Everbilt-...9131/203661032
Ryan
**edit: I think these are the right feet
http://www.homedepot.com/p/Everbilt-...9131/203661032
Ryan
Last edited by Ballistic Beak; 05-01-2016 at 08:50 PM.