Leaking Gil Sea Strainers
05-10-2016, 06:18 PM
#1
Registered
Thread Starter
Join Date: Oct 2003
Location: Ballston Spa, New York
Posts: 524
Likes: 0
Received 11 Likes
on
9 Posts
Leaking Gil Sea Strainers
I have a set of Gil "offshore strainers" that I just put new lids and o-rings from CP Performance on and they still leak. I've siliconed the o-rings onto the lids and tightened them down as tight as I'm comfortable with and they still leak. Anyone have any tricks to seal them up?
05-18-2016, 08:51 AM
#2
Registered
iTrader: (3)
Join Date: Aug 2011
Location: Charlotte, NC
Posts: 550
Likes: 0
Received 0 Likes
on
0 Posts
I have a set of Gil "offshore strainers" that I just put new lids and o-rings from CP Performance on and they still leak. I've siliconed the o-rings onto the lids and tightened them down as tight as I'm comfortable with and they still leak. Anyone have any tricks to seal them up?
05-16-2018, 05:19 PM
#4
Platinum Member
Platinum Member
iTrader: (6)
are these the ones with the O-rings on the bolts too..........post a pic of one
Last edited by F-2 Speedy; 05-16-2018 at 05:22 PM.
