Replacing exhaust tips
#1
Registered
Thread Starter
Join Date: May 2016
Location: Austin, Texas
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Replacing exhaust tips
Believe it or not, my wife is complaining that the factory 496 HO's are not loud enough in my boat. I looked at the factory tips and they have staggered plates inside the tips that appear to either prevent water reversion or they are some form of baffles. Will changing to an angle tip with internal flappers increase the exhaust sound a bit? My assumption is yes, but don't really want to do it, if I don't get a noticeable difference.