500efi installing blowers
#1
Registered
Thread Starter
Join Date: Jul 2010
Posts: 105
Likes: 0
Received 0 Likes
on
0 Posts
500efi installing blowers
Hey guys just wondering your thoughts on putting blower shop 250 kits on my 500efi motors and going to single dominators. I have a line on a cheap set of brand new blower shop 250 kits. Just wondering what are your thoughts and what all it will require for the swap. Thanks
#3
Charter Member #1093
Charter Member
Join Date: Feb 2001
Location: Lighthouse Point & Ocean Reef FL
Posts: 660
Likes: 0
Received 0 Likes
on
0 Posts
I did it adding Whipples to my 500 efis. If you're running Bravo sterndrives, regardless of Bravo model: XR, IMCO lower, etc. you'll puke them in short order. Mine with the Whipples were app. 690 HP on the dyno at 7 lbs of boost. To get to the right props, gear ratio was changed from 1.5 to 1.36. Chief Performance (Tommy) assembled mine.