Cam and valvetrain longevity....??? low duration high lift...
10-06-2016 | 12:57 PM
#1292
Registered
Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
Oh snap.
10-06-2016 | 01:02 PM
#1293
Registered
Joined: Jul 2004
Posts: 11,332
Likes: 73
From: chicago
Funny, that wasnt cam motions take on the issue from what I hear. They advised sending the cam in, to make sure it was ground straight and true after seeing the pictures . 0 taper on lobe.
Didnt someone here say there appeared to be a taper issue after seeing the cam pics ?
They did not say " builder error builder error builder error seruo error setup error" , and they are the ones who ground the cam.
Didnt someone here say there appeared to be a taper issue after seeing the cam pics ?
They did not say " builder error builder error builder error seruo error setup error" , and they are the ones who ground the cam.
Last edited by MILD THUNDER; 10-06-2016 at 01:16 PM.
10-06-2016 | 01:09 PM
#1294
Thread Starter
Gold Member
Joined: Oct 2005
Posts: 11,688
Likes: 216
From: Olmsted Falls,Ohio Marblehead,Oh
Well I mean it's all my fault duh!!! Just like MER, Orlandi and haxby.... We all must be at fault
10-06-2016 | 01:09 PM
#1295
Registered
Joined: Oct 2011
Posts: 173
Likes: 2
Funny, that wasnt cam motions take on the issue from what I hear. They advised sending the cam in, to make sure it was ground straight and true after seeing the pictures
They did not say " builder error builder error builder error seruo error setup error" , and they are the ones who ground the cam.
They did not say " builder error builder error builder error seruo error setup error" , and they are the ones who ground the cam.
Last edited by ARB38; 10-06-2016 at 01:14 PM.
10-06-2016 | 01:10 PM
#1296
Registered
Joined: Mar 2008
Posts: 3,613
Likes: 375
From: Traverse City MI
I have called a big talked to Bob and I also called Cam Motion today. My cams are induction hardened 8660 billet steel premium grade cores. There are some better but many not as good. They are better than what the OEM's use for their hydraulic roller cams. After this discussion I am not worried about hardness issues or the cam specs. My boat runs great any it should for a long time.
After following this long thread and others it seems Tim's issues are more than a Bob M issue and more about the engine assembly and also putting all the right parts together to reach his goal. Maybe he should have had someone help with final assembly and checking all the parts to confirm they were all correct.
After following this long thread and others it seems Tim's issues are more than a Bob M issue and more about the engine assembly and also putting all the right parts together to reach his goal. Maybe he should have had someone help with final assembly and checking all the parts to confirm they were all correct.
Let's use some common sense here, do you really think Bob would admit fault when he never has in the past?
No parts supplier would admit a problem with thier product either unless forced to recall it by law.
Good ole Bob hasn't changed one bit...
Not accepting responsibility for your own actions is one of the TOP issues humans have, especially in America. So sad Bob.
10-06-2016 | 01:12 PM
#1297
Thread Starter
Gold Member
Joined: Oct 2005
Posts: 11,688
Likes: 216
From: Olmsted Falls,Ohio Marblehead,Oh
10-06-2016 | 01:13 PM
#1298
Registered
Joined: Mar 2008
Posts: 3,613
Likes: 375
From: Traverse City MI
Let's get back on track......
ANY PROVEN combos here with HUNDREDS of endurance hours run in OFFSHORE conditions?
ANY more tech info advice to share with the community besides a sales pitch?
ANY PROVEN combos here with HUNDREDS of endurance hours run in OFFSHORE conditions?
ANY more tech info advice to share with the community besides a sales pitch?
10-06-2016 | 01:15 PM
#1299
Registered
Joined: Nov 2004
Posts: 14,094
Likes: 3,684
From: On A Dirt Floor
Sorry. Mistaken person.
Last edited by SB; 10-06-2016 at 01:33 PM.
