quick fuel carbs

Reply Subscribe

Thread Tools

10-11-2016, 10:55 AM

#11

bck

Charter Member#568

Charter Member

Join Date: Dec 2000

Location: Western N.Y.

Posts: 2,171

Likes: 5

Received 16 Likes on 14 Posts

Bigger isn't always better though. Always heard good things about them however.

__________________
Straight bottoms and flat decks

12-20-2016, 05:10 PM

#12

GPM

Registered

Join Date: Mar 2004

Location: Pa

Posts: 2,664

Likes: 7

Received 80 Likes on 58 Posts

Quote:

Originally Posted by GPM

My brother bought a new Quick Fuel 950, put it on a fresh 468 BBC, ran it on the dyno 2 days ago couldn't get the A/F ratios between sides closer than 1.5 difference. Tried an older used Holley the ratios were within .2 side to side. Called the Tech, first he tried to blame the Edelbrock RPM manifold, then he said he had no clue, didn't offer to check it out, totally useless. Not a good first experience with Quick Fuel.

After a few emails it turns out Quick Fuel ( Holley) is a stand up company, they had me send the carb back for repair, problem was the Scumbag my brother bought it from was a piece of s#%t.

12-21-2016, 07:56 AM

#13

ezstriper

Registered

Thread Starter

Join Date: Nov 2005

Location: Fredericksburg, Va

Posts: 4,554

Likes: 0

Received 2 Likes on 2 Posts

glad to hear something positive...to me there is very little difference between the holley H/P and a quickfuel, so don't understand the big deal, if YOU are on the Holley carb tech line you should knows carbs..period

12-21-2016, 09:28 AM

#14

Registered

iTrader: (1)

Join Date: Nov 2004

Location: On A Dirt Floor

Posts: 13,562

Likes: 3,913

Received 3,133 Likes on 1,410 Posts

Quote:

Originally Posted by GPM

After a few emails it turns out Quick Fuel ( Holley) is a stand up company, they had me send the carb back for repair, problem was the Scumbag my brother bought it from was a piece of s#%t.

Was it used or new ?