Too much Bow Lift.
#21
Registered
Thread Starter
I just realized I have a 25p Mirage plus (not a 23p) spinning 5000rpm. My peak hp was 5600rpm.
#22
Registered
iTrader: (7)
Good luck though.
When you get a chance take a measurement to see how far below your propshaft center is below boat bottom. All you really need is a straight edge and a tape measure to get apprx.
#23
Registered
iTrader: (7)
24 antimidator might be the ticket also. If I recall a 25 p mirage to a 24 3 blade antimidator was about 300-400 rpm's more with the 24. 23 mirage was about identacle top rpm as 24 antimidator. BBC just doesn't even sound right at 5k. Lol..
#24
Platinum Member
Platinum Member
iTrader: (2)
Mine is a generation newer, but I really like the Bravo that I've been using. I believe both 242's use the same bottom, but don't quote me. May be worth a try.