Offshoreonly.com
Page 7 of 19
« First
5
6
7
8
9
17
Last »
Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   General Q & A (https://www.offshoreonly.com/forums/general-q-20/)
-   -   Who wants to play (https://www.offshoreonly.com/forums/general-q/343252-who-wants-play.html)

SB 12-14-2016 08:52 PM
Originally Posted by getrdunn (Post 4509700)
M then K and let's hope those abbreviations are incorrect. M on a 112 would neat to see. The 651 has a nice flat curve also.
:cool-smiley-011:::boat:


Originally Posted by SB (Post 4509157)
M then K. :)

MILD THUNDER 12-14-2016 09:00 PM
2.5 hours later, and i'm almost done.

Why did i start this thread. lol I'm dreading having to scan and upload all these results. :poopoo:

I'll need you guys to let me know when you want to wrap up the voting.

endeavor1 12-14-2016 09:03 PM
Post the results:evilb: voting ended. . . Trump won:lolhit:

SB 12-14-2016 09:21 PM
Originally Posted by endeavor1 (Post 4509710)
Post the results:evilb: voting ended. . . Trump won:lolhit:
He's stimulating himself, so I would guess it will be a long night. LOL

Originally Posted by MILD THUNDER (Post 4509673)
Im gonna start running some simulations tonight. :bong:

SB 12-14-2016 09:22 PM
Originally Posted by MILD THUNDER (Post 4509709)
2.5 hours later, and i'm almost done.

Why did i start this thread. lol I'm dreading having to scan and upload all these results. :poopoo:

I'll need you guys to let me know when you want to wrap up the voting.
200 page mark.

offshorexcursion 12-14-2016 09:40 PM
Joe WAIT Bob didn't guess yet:whistle::party-smiley-004:

endeavor1 12-14-2016 09:44 PM
Originally Posted by offshorexcursion (Post 4509720)
Joe WAIT Bob didn't guess yet:whistle::party-smiley-004:
Yes he did.... Just ask tim force:party-smiley-004::poopoo::angry-smiley-038:

getrdunn 12-14-2016 09:56 PM
Originally Posted by MILD THUNDER (Post 4509709)
2.5 hours later, and i'm almost done.

Why did i start this thread. lol I'm dreading having to scan and upload all these results. :poopoo:

I'll need you guys to let me know when you want to wrap up the voting.
Joe I'm pretty certain many appreciate what your doing though. It's real decent of you. I realize it's not spot on however seemed fairly close from others you did in the past.

I have a favor to ask though and when you complete if you could use the winning cam with 305 AFR CNC heads. That would be interesting to see same set up with same cam only head change. Might do some side bets on that one if you'd post it some time.

getrdunn 12-14-2016 09:57 PM
Originally Posted by offshorexcursion (Post 4509720)
Joe WAIT Bob didn't guess yet:whistle::party-smiley-004:
He does this in his sleep. I'd say he already knows. But ya I was gonna mention same thing earlier. Hah

MILD THUNDER 12-14-2016 10:04 PM
2 Attachment(s)
Originally Posted by endeavor1 (Post 4509222)
I ll take the 741 (but can you advance it another 4 degrees)
You ALMOST had it man. The 741 is the winner. However, once I advanced it 4*, it lost. :party-smiley-004:

The 741 Cam, made the most AVERAGE power, from 3500 to 6000rpm.


All times are GMT -5. The time now is 03:56 PM.
Page 7 of 19
« First
5
6
7
8
9
17
Last »
Show 40 post(s) from this thread on one page


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.