|
Charlie, I would be glad to go over it with you in more detail. You can reach me anytime at 615-216-7449
Eddie |
Charlie, you can't go wrong dealing with Eddie.
Padraig |
Eddie,
Would you please post a part number for the MLS SS exhaust gaskets? Thanks! |
We have Cometic make them for us. They aren't in their catalog or website since they don't advertise them or normally make them. They are 5 layers thick and have both standard GM pattern and the 525 pattern.
Eddie |
i will add that sooner or later the heads will need to be removed for a valve job and new head gaskets,may as well do it now,then you can go 250 to 300 hours and not worry about top end stuff.
|
How do you only run 20 hours per year? I hope they are balls to the wall hours...
|
Threads merged. No reason to post the same thing in 2 sections
|
Have the headers been tested for leaks? :eek:
And what exactly are you buying? 38 Fountain EC? 38 Cigarette? 42 Fountain? Hydrohoist? |
Originally Posted by Young Performance
(Post 4517429)
To pull it out, tear down the top end, rebuild the heads with all new parts, surface heads, valve job, tap heads, detail heads to remove any casting flash, etc., lap valves, assemble heads, install with new ARP head bolts and Cometic head gaskets, reassemble top end, install engine and drive and test run boat runs around 3K
Eddie |
Originally Posted by thirdchildhood
(Post 4517512)
Why do you need to pull the engine(s)?
|
| All times are GMT -5. The time now is 12:47 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.