|
Promaxx 317s
1 Attachment(s)
So here ya'll go... first real dyno session with the new 317s
[ATTACH=CONFIG]564769[/ATTACH] |
^^^Get the sheet with the fuel flow (lbs/hr) and post them up, Thanks ! Airflow would be nice too.^^^
|
I wish I could run a 108 cam, that's some nice results... did I miss head flow numbers?
Originally Posted by adk61
(Post 4528785)
So here ya'll go... first real dyno session with the new 317s
[ATTACH=CONFIG]564769[/ATTACH] |
way back
|
Originally Posted by SB
(Post 4528788)
^^^Get the sheet with the fuel flow (lbs/hr) and post them up, Thanks ! Airflow would be nice too.^^^
|
I will look..
Originally Posted by adk61
(Post 4528793)
way back
|
Originally Posted by Full Force
(Post 4528796)
I will look..
AK Racing 317s Intake .200 = 161cfm, .300 = 234, .400 = 292, .500 = 348, .600 = 378, .700 = 391 .800 = 396 exh .200 = 119, .300 = 162, .400 = 209, .500 = 232, .600 = 261 (w pipe 283) .700 = 272, (288) .800 = 280 (293).+++ |
Originally Posted by adk61
(Post 4528795)
It's ok SB I wouldn't want anyone to think I'm advertising my heads now would I? :angry-smiley-038:
That sheet does not have much info. I would hope the owner of the engine received more info than that. If he didn't, he didn't get much for his money, other than, well, a sheet. |
Originally Posted by SB
(Post 4528803)
Not saying that.
That sheet does not have much info. I would hope the owner of the engine received more info than that. If he didn't, he didn't get much for his money, other than, well, a sheet. |
SB, i never see you question a dyno sheets validity when it was a marine kinetics build. But foxwells name is on that sheet, so it must be bullchit.
Still havent seen a dyno sheet , posted from anything youve built or dynoed |
| All times are GMT -5. The time now is 09:54 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.