Gen V heads on a Gen IV block head gasket?
#1
Registered
Thread Starter
Gen V heads on a Gen IV block head gasket?
Getting conflicting information on the correct head gasket for 088 heads on a Gen IV bowtie block. I bought 17049 Felpro for marine application because I read on many forums that you need to use a Gen IV head gasket to match the block. I called Fel Pro tech line and ended up having to call back 3 times fro different reasons and got 3 different answers from a 17046 (too small of a bore), 17048 (Gen VI block) and a 1093.
thanks
thanks
#5
Registered
Thread Starter
I also read on another forum they called Cometic for this application and they ended up telling them they had nothing. I will try and find it.
#6
Registered
iTrader: (1)
Pretty sure it is the 1047.......double check.....I am not responsible for your mishaps...lol
https://www.summitracing.com/parts/fel-1047
https://www.summitracing.com/parts/fel-1047
#7
Registered
iTrader: (1)
BTW: will be a better search if you use these terms: Mark IV block and Gen V heads.
GEN IV will not, since it's official, and thus more used name is Mark IV.
GEN IV will not, since it's official, and thus more used name is Mark IV.
#9
Registered
SB is correct. I run 1037 gaskets on my 525sc. MK IV block with Gen 5 heads. I have 60 hours with 5lbs of boost. No Issues. I have a 454 so my gaskets are a smaller bore.