The stock 8qt pan would be a major upgrade over what you have. Same pan on engines up to 700sci. Can probably be had for $100.

$229 new for a GM Marine pan. Don't think anything else is included with it though.

Here's a Gen V/VI pan
http://www.michiganmotorz.com/74l--8...an-p-4052.html

I run Dooley Enterprises on my own engines and they've been great and Stef's on some others.

That was a winner right there, but no windage tray or baffles?

That Summit Racing one I posted does have a windage tray and trap door baffles... for $219 :)

Not going to work with an offshore mount correct?

Worked with mine.. had about an inch of clearance.. I'll see if I have a pic of it....


Here is the mount I was using...


http://i.ebayimg.com/images/g/2fEAAM...8m-/s-l500.jpg

MERCURY 847786T

I was thinking the same thing, it would be an issue in a twin application with the angled bottom

Thanks!

A nice pan for the right price, but I think I need one tapered shallower on the front. I don't have offshore mounts, but my bilge pump lives there and space is pretty tight already. I'm no expert but I think I have a pretty low X dimension as it is. There's what seems like two feet from the carb flange to the bottom of the hatch.