What I have now came from CP. No issues with the quality but if eBasic has the same ones for less then... CP also sold some with an extra wire or something for aftermarket ignition but I didn't get those.

^^See page 11^^

Thanks for the link.

BCK - their distributors as seen on page 12 of their catalog:


A & M Marine
13906-B Denton Drive
Dallas, TX 75234
972-484-8434 phone
www.ammarine.net
Chapman Marine
2201 S.E. Indian St. A-5
Stuart, FL 34997
800-245-3622
www.chapmanmarine.com
CP Performance
5725 Redwood Dr.
Rohnert Park, CA 94928
707-585-9871
www.cpperformance.com
Donovan Marine Inc
6316 Humphreys Street
Harahan, LA 70123
800-347-4464
www.donovanmarine.com
E-Basic Power Ind Inc
177 Fulford Dr
Harkers Island,NC 28531
252-728-5566
www.ebasicpower.com
Ellett Brothers
PO Box 128
Chapin, SC 29036
800-845-3711
www.ellettbrothers.com
Gemeco Marine Acc LLC
1141 S. Ron McNair Blvd.
Lake City, SC 29560
803-693-0777
www.gemeco.com
Hardin-Marine
11 Industry Drive
Palm Coast, FL 32137
386-445-2500
www.hardin-marine.com
Call on one of our
Authorized Distributors
listed here.
Jerry’s Marine Serv. LLC
100 SW 16th ST
Ft. Lauderdale, FL 33315
800-432-2231
www.jerrysmarine.com
Medart Marine Supply
124 Manufacturers Dr.
Arnold, MO 63010
314-282-2300
www.medartmarine.com
Michigan Motorz
1800 Austin Ave.
Troy, MI 48083
248-524-9600
www.michiganmotorz.com
V & V Marine Products
PO Box 14957
Ft Worth, TX 76117
817-284-1125
www.vvmarine.com

What kind of harness are you looking for. I may be able to help. Let me know. Thanks

I have a 502 engine charging/starting harness i bought new for my shop and a boat wiring harness with cannon plug i wired my dyno with to make doing marine engine connections easier, both came from basic power, decent stuff in my opinion, smitty

I have to count the pins to be sure, but I'm going to need the real common round one that is used on the engine itself. I think it's 8 pins or something close to that