cam shafts
03-12-2017 | 10:36 PM
#12
Charter Member # 55
Joined: Oct 2000
Posts: 20,257
Likes: 2,505
From: Omaha/LOTO
Crane 741 http://www.cranecams.com/product/car...detail&p=24283
Crane 731 http://www.cranecams.com/product/car...detail&p=24282
Also, I think you are going to need more carb.
Crane 731 http://www.cranecams.com/product/car...detail&p=24282
Also, I think you are going to need more carb.
03-13-2017 | 12:15 AM
#13
Registered
Joined: Oct 2013
Posts: 2,888
Likes: 148
From: SF Bay Area
03-13-2017 | 02:45 AM
#14
Registered
Joined: Aug 2005
Posts: 918
Likes: 205
From: Cudjoe Key FL
looking for input from anyone who has tried the comp cams xtrem marine xm284hr 112 lobe separation 110 center line, 230int / 290 ex duration @.50. looking in this area for lift .547 but want to stay away from big duration. pleasure/ performance boat. p.s. fairly long no wake zone to get to the big water if that matters.
03-13-2017 | 10:18 AM
#16
Registered
Joined: Nov 2004
Posts: 922
Likes: 54
From: Lago Vista TX
I had O2 bungs in the exhaust so tuned the carb with a wideband. would idle ALL day with NO issues...
03-13-2017 | 10:25 AM
#17
Registered
Joined: Nov 2004
Posts: 14,108
Likes: 3,694
From: On A Dirt Floor
03-13-2017 | 11:41 AM
#18
Registered
Joined: Oct 2007
Posts: 8,439
Likes: 94
From: yorkville,il
i started to post similar info but deleted it because i thought some would argue the fact that a smaller engine could need a bigger cam.some don,t understand the role piston speed play,s.i also think the op needs more carb.
Last edited by mike tkach; 03-13-2017 at 11:44 AM.
03-13-2017 | 12:29 PM
#20
Registered
Joined: Oct 2013
Posts: 2,888
Likes: 148
From: SF Bay Area
