J tubes
#21
#22
#26
Registered
Joined: Jan 2005
Posts: 3,570
Likes: 127
From: Pasadena, MD
1, That's why I like Edelbrock. No gaskets below the fuel level and all of them are set up to dump down the throat without J tubes.
2, The race boat uses old style Holley 850's - 4150's. The front bowl's vent would dump outside the carb if over flowed so I did the J tubes on them just to be sure. Even the Holley 600 marine I'm using on my next project had J tubes because both vents on it would have dumped fuel outside the carb.
2, The race boat uses old style Holley 850's - 4150's. The front bowl's vent would dump outside the carb if over flowed so I did the J tubes on them just to be sure. Even the Holley 600 marine I'm using on my next project had J tubes because both vents on it would have dumped fuel outside the carb.








