502 MPI Alarm System Questions??
#11
Thread Starter
Registered

Joined: Sep 2013
Posts: 673
Likes: 99
From: KY
Thanks everyone for the replies. Very helpful. Actually found the wires. They were tucked away good. Tested with the key on (not started so low oil pressure should make it alarm) and didn't have power. Thinking harder about it, maybe such indicators make the alarm go to ground instead of having 12volts? So tomorrow I'll test for a ground instead. If that don't work, not sure what my next step is.
I'm very OCD and like to have everything working correctly.
I'm very OCD and like to have everything working correctly.
#12
If the alarm wire is grounded it will set off the audible alarm.
I had an alarm wire that was spliced come apart. The bare wire making contact with the intake manifold was setting off the alarm.
I had an alarm wire that was spliced come apart. The bare wire making contact with the intake manifold was setting off the alarm.




