Stainless Rub Rail?
#1
Registered
Thread Starter
Stainless Rub Rail?
For those who have installed rub rail with the stainless insert, did you screw the stainless through the rub rail into the boat? Or use a short screw to screw the stainless into the vinyl rub rail? Any other tips or tricks besides a mallet and a lot of patience?
#2
Registered
You can do it either way But , predrill a pilot hole for the screw. If you use an impact driver it will burr up the stainless screw head , trying to thread its way into the fiberglass.