|
Running 496 on a stand
I want to run my 496 engine in the workshop out of the boat. can someone tell me the wiring i need to run to the 10 pin plug |
https://cimg0.ibsrv.net/gimg/www.off...774d6efaec.jpg
I wired mine to a key switch like this...... |
Service Switch from CDI , works awesome , helps with diagnostics also.
|
Thanks so the big/fat red wire and the black wire are the power to the ecu .and the thin red wire is the key/ switch |
you need to hook the battery - to the block and the battery + to the starter, which will provide +12vdc on the pin where the large red wire is, this will connect to the center post of the switch, then the switched +12 will return on the smaller red wire thats connected through the plug to the starter relay, your ecm, alternator, ect should be powered off the other wires connected to the + starter terminal where the battery connects.
|
Originally Posted by F-2 Speedy
(Post 4613664)
you need to hook the battery - to the block and the battery + to the starter, which will provide +12vdc on the pin where the large red wire is, this will connect to the center post of the switch, then the switched +12 will return on the smaller red wire thats connected through the plug to the starter relay, your ecm, alternator, ect should be powered off the other wires connected to the + starter terminal where the battery connects.
|
https://cimg4.ibsrv.net/gimg/www.off...f0c14df3d5.jpg
Do you want me to come start it too.........:funnypost:......pin 5 is coil...........mine are carb on EFI |
Oh I have a 10 pin plug and fuel injection,I need to run power to the ECU this then controls the eight coils. Thanks for the offer of coming over and starting my engine,cant yet I am still in the middle of a major rebuild. Thanks for your help |
| All times are GMT -5. The time now is 05:17 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.