Offshoreonly.com - Which head gasket to use BBC salt water

Page 4 of 4

Show 40 post(s) from this thread on one page

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Which head gasket to use BBC salt water (https://www.offshoreonly.com/forums/general-q/353096-head-gasket-use-bbc-salt-water.html)

dereknkathy

07-25-2018 09:32 PM

4.37 is .120 bigger than 4.25 bore. .060 bigger than 4.31. That is .030 to .060 gap between bore and sealing ring. Wouldnt want to go any tighter.

dbkski

07-26-2018 03:52 AM

Quote:

Originally Posted by adk61 (Post 4639944)

I use Hylomar(tm) if ya cant find that Copper Permatex #101MA will work just fine (Hylomar is a Rolls Royce approved product)

Which Hylomar product do you use?

Hylomar

adk61

07-26-2018 09:23 AM

Hylomar

Quote:

Originally Posted by dbkski (Post 4640106)

Which Hylomar product do you use?

Hylomar

Hylomar jointing compound spray on, shake well first lol this stuff always stays wet/gel, doesn't dry/tack like Copper
You can get it from Dakota Parts Warehouse, Brian Benson 605-388-3396 tell him Al from AK Racing sent you. Great guy to deal with

Baja Rooster

08-20-2018 01:09 AM

Any issues with running 4.5” bore cometic Head gaskets on 4.5” bores? Pistons are down .010 in the hole and I don’t feel any lip into the bores. I see some advice here to go bigger than the bores and wondering if I have an issue here.

All times are GMT -5. The time now is 08:34 PM.

Page 4 of 4

« First

Show 40 post(s) from this thread on one page