Offshoreonly.com - Fuel Tank pickups

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- General Q & A (https://www.offshoreonly.com/forums/general-q-20/)

- - Fuel Tank pickups (https://www.offshoreonly.com/forums/general-q/35328-fuel-tank-pickups.html)

Kanookstr

10-22-2002 10:09 AM

Fuel Tank pickups

Upgrading to 1/2 or 5/8 fuel tank pick up per Aeromotives recomendations. Anyone know who carries them???
Thanks

Cord	10-22-2002 10:12 AM

Mine are just a piece of aluminum tubing with a 45 degree angle cut on the end. The other end of the tubing is tapped and is threaded into a reducing bushing. This bushing is then threaded into the tank bung.

RumRunner

10-22-2002 05:50 PM

I just made some for my boat. Welded new bungs into the top of the tank, then took some 5/8" I.D. stainless tubing, and welded it into a 3/4" N.P.T. by -12 A.N. adapter. Not too bad of a job while the motor is out.

Doug

All times are GMT -5. The time now is 08:52 AM.