Arneson surface drive on single engine vee
05-09-2018 | 01:13 PM
#12
Registered
Joined: Apr 2017
Posts: 17
Likes: 0
From: Harrison Township, Michigan
Single Bravo conversion can work, it's all stabilization, we put two stabilizing fixed rudders on the bottom of a 280 Silencer on the back step in front of the drive right next to the drain, just Mastercraft does on their ski boats, an arneson is just a big inboard that runs out the back of the boat instead underneath the boat, so set it up like an inboard, rudders 6" long X 12" deep,
05-09-2018 | 02:00 PM
#13
Registered
Joined: Jul 2012
Posts: 461
Likes: 1
From: Central Ohio
Single Bravo conversion can work, it's all stabilization, we put two stabilizing fixed rudders on the bottom of a 280 Silencer on the back step in front of the drive right next to the drain, just Mastercraft does on their ski boats, an arneson is just a big inboard that runs out the back of the boat instead underneath the boat, so set it up like an inboard, rudders 6" long X 12" deep,
